All products are made to order, please contact us for current lead times.
This carbon fiber splitter was designed for the C7 platform and uses 3 diffusers to help create a low pressure on the lower surface as well as a --" forward splitter to capture all the high-pressure air on top. It also uses a radiused leading edge to promote good flow to the underside and smooth transitions into the 11* and 14* outer diffusers as well as a large 4* center diffuser.
Please choose in the drop down if you would like just the lower undertray, the top splitter or both with or without uv clear coat on the top in the dropdown.
The splitter and undertray can be bolted together with scuff pads, support rods or through bolts or the two can be bonded together by the installer.
The end user is responsible for proper, structurally sound install. This is a high downforce splitter and MUST be attached to the FRAME. 3rd party wind tunnel testing has shown over 350# front downforce with this splitter.
