All products are made to order, please contact us for current lead times. Credit card processing fees will not be refunded because of cancelation due to lead times.

Fits C6 Corvette, All Models!!

This is the original Brian Glover Design Rear Racing diffuser for Single outlet exhaust systems now made in 100% carbon fiber!

This functional diffuser reduces turbulence at the rear and, therefore, reduces aerodynamic drag. A flat floor option is in the works to mate up to the front of this diffuser, completing the underbody for ultimate in downforce production as well as drag reduction. 

It replaces the fake OEM Diffuser (parachute lol) using factory bumper slots as well as the factory hardware and mounts in addition to the two brackets that attach to the lower A-arm/sway bar bolts.

Every diffuser now comes with high quality gloss urethane clear coat to protect the carbon 

Matte clear coat takes special care

Here are some tips for caring for a matte finish clear coat:

Use the right products

Use products made for matte finishes

Use cleaners, sealants, and coatings designed for matte paint.

For example, you can apply a matte finish cleaner and protectant after washing to help prevent the finish from dulling over time. You can also use a paint sealant or ceramic coating, such as Chemical Guys' Jet Seal Matte Paint Sealant or Gyeon's, 02 Matte EVO Light.

Avoid circular motions

Use products specifically made for matte finishes, such as a wax-free shampoo and microfiber wash mitt. Avoid using products made for normal paint, like wax, detail spray, or Armorall, as they can alter the look of the finish.

Avoid excessive rubbing

Matte finishes have a textured finish that scatters light, so excessive rubbing can flatten the texture and make the finish reflective. Don't even look at it lo1

Use clean, soft materials

Use clean, soft microfiber towels and wash mitts to avoid scratching or marring the surface. Avoid using dry towels, sponges, brushes, or clay bars.

When cleaning, apply cleaner to both the microfiber towel and the surface, then let it soak in. Lightly wipe the surface in a back-and-forth motion, and rinse with water to make sure the product doesn't stay on the finish. Avoid using a circular motion, which can leave swirls.

Don't polish

Polishing a matte finish can make it look semi-glossy instead of matte.

Be careful and gentle and your finish will last.

Reverse lights are not included 

Exhaust not included please choose the exhaust option to include the stainless steel, fully tig welded over axle kit using Vibrant resonators.

This exhaust clip is taken from the Brian Glover Design website  https://www.youtube.com/watch?v=NN8k_fqV8Vw